The Xenotech Britelight 4K Xenon is the most powerful intermediate-sized portable searchlight system. It is ideally suited for any application requiring an intense beam of light with a minimum of lamp head size and weight. The Xenotech Britelight 4K Xenon is specifically designed to withstand the rigors of daily use in motion picture production, rental, and other high demand searchlight applications.
The lamp head optical system utilizes a unique 2000 watt short-arc xenon lamp and a high efficiency short focal length electroformed parabolic reflector to produce an intense beam of collimated daylight-balanced light. The optical system also encompasses a motorized focus mechanism that allows the beam angle to be adjusted from the lamp head, ballast, or from a remote location when using the optional remote control system. Power control switches located on the rear of the lamp head allow the lamp to be ignited and extinguished at the lamp head as well as the ballast and in remote control locations.
The lamp head cooling system utilizes a high-volume, low-velocity blower, extensive sound absorbing, vibration dampening, and baffling to attain the lowest sound of any comparable system. The lamp head yoke terminates in a standard 1-1/8″ pin, allowing the use of all stands, hanging, and mounting devices configured for this size pin. The Britelight 4000 lamp head is safety listed as “suitable of wet locations” by ETL
The Britelight 4000 electronic ballast was introduced in early 1990. It was the first compact 4000 watt xenon ballast designed specifically for portable use in the conditions found in motion picture production and equipment rental applications. In these few short years it has become one the most popular and sought after items in our product line and a standard in the entertainment industry.
Always seeking to improve the performance and reliability of our products, we redesigned the Britelight 4000 electronic ballast. In addition to the performance and features you have come to expect, the new redesigned electronic ballast incorporates the latest power factor corrected switching power supply technology and has been designed with an additional 50% over nominal power capacity for maximum reliability. The ballast’s thermal management system has been improved to provide extended operation in hot environments. As always, the ballast power input is configured for single phase operation for use anywhere in the world.
The ballast output supplies DC current with no AC line ripple. This pure DC output produces an unvarying light from the lamp allowing use of any shutter speed without concerns of synchronizing the camera with the line frequency. The stability of the ballast output also makes unnecessary the use of a crystal synchronized generator. Overall, this is an ideal light source for high speed and special effects photography applications.
|Color Temperature||5600 K (constant)|
|Operating Temperature||-18°C to +50°C (0°F to 120 °F)|
|Cooling System||Forced Air|
|Peak Beam Candle Power||395 million|
|Diameter of Front Aperture||18″|
|Diameter of Parabolic Reflector||20″|
|Weight of Fixture Only||52 lbs|
|Weight of Shipping Case||42 lbs|
|Weight of Fixture Only||134 lbs|
|Dimensions of Fixture||25″ x 29.5″ x 34.5″|
|Termination||Camloc or 60 amp Bates|
|Input Voltage AC||208-230 VAC|
|Input Current||40 amps|
|Output Voltage||DC – 25 – 35|
|Output Current||DC – 120 – 145|
|LAMP FOCUS||DISTANCE||BEAM DIAMETER||FOOT CANDLES|